SCK-300 Digital Spin Coater Kit

Description

The
SCK-300 Spin Coater Kit
(
version 2
)
is a fully assembled, modular, "Home-Built" Spin Coater that improves on the original SCK-300 design by incorporating a versatile
Arduino-based
Closed-Loop
Digital Controller
.  It comes with everything needed for R&D spin coating work of small substrates.
These kits are not suitable for production or precision work!
Key Features:
Low Cost
- The cost of this kit is significantly less than a commercial Spin Coater unit. This makes it ideal for R&D work where the benefits of a commercial spin coater is yet to be determined.  It also means that multiple units can be purchased to speed up the research process.
Compact Size
- The small foot print of the SCK-300 means that it requires very little space.  For example, the unit can be setup in a crowded hood, or inside a glove box.
Closed-Loop Digital Control
- Greater control of coating process
Easy to Setup and Use
- Simply turn on the unit, place sample on chuck, put on the chamber cover, select spin speed, and start the coating process.  Moreover, the kit only needs a 110V or 220V AC power source.  No vacuum pump is required.
Dynamic Spin Range
- Spin rates from 500 - 6,000 rpm can be achieved with good control. Most spin coating work is typically done between 1,200 and 5,000 rpm.
The SCK-300 Spin Coater Kit contains the following items:
Spin Coater Base -- Motor/2" Diameter Aluminum Chuck/CD Cakebox/ABS Enclosure
Arduino-based Closed-Loop Motor Interface Module
3.5" Touch Screen Controller
9V UL Certified DC Universal Power Supply
Roll of Double Sided Tape
Please see
User Manual
for a more detail description of the unit, including key features and limitations relative to commercial units costing over
10x
as much.
Video of SCK-300 Spin Coater in Action
P.S. MAKE SURE TO ALSO CHECK OUT THE SCK-300P MODEL WHICH HAS A VACUUM CHUCK AND HIGHER SPEED RANGE.